3 in 1 Car Phone Holder Mount for Dashboard Windshield Air Vent fit for Moto G Stylus(2023 2022 2021 2020/5G),Motorola G Power(2023 2022 2021),Edge 30 Fusion/Edge+/Thinkphone/G Play/G Pure/Fast,Z4 Z3

Price: $9.99
(as of Nov 16, 2023 11:15:38 UTC – Details)

Product Description

YBPowercable 2023 New Upgraded Phone Car Holder 3 IN 1

—— Ultra Stable Solid, Protection Enhanced

Why do we trust YBPowercable?

3 in 1 Car Mount – Can be perfectly applied to the car dashboard, windshield or air vent.

Enhanced Suction Cup – Latest high-quality adhesives, triple stickiness, easier to keep a vacuum and more stable.

2023 New Upgraded Air Vent:YB Phone holder for car adopts 2023 latest locking design. The clip hook will catch one of car air vent blades. The spring clip plate and the tightening nut will provide absolute fixation.

Unlimited perspective – 360° rotating ball joint can be adjusted at any angle, And you can switch between vertical and horizontal views freely.

Triple Upgrade – Shock-absorbing silicone arm, silicone padded back and silicone pads holding feet, used to better grabbing and protecting your cell phone.

Hassle-free Charging:Reserved space for your charging cable. Juice up your phone freely on a road trip.

Super Strong Vacuum Suction Cup

With a coating of advanced high-temperature resistant gel sticky gel, the suction cup will prevent air gaps and ensure secure attachment to the dashboard, windshield, desk, and other flat surfaces.The suction cup can resist up from -4℉(-20 ℃) to 194℉ (90 ℃).

Reusable and multi-use scenarios

The vacuum suction cups only need to be washed and dried naturally, and then pasted to a new place. As long as the suction cups are kept clean and free of any dust, the suction will be as strong as before! No matter in the car, at home or in the office, you can find a suitable scene to use it.

Installation Steps

1. Turn counter the nut that on the back -clockwise to remove it.

2. Be sure you put the threaded ring through the ball first.

3. Snap right the ball into groove on the back of the holder, tighten the nut around the well.

4. Press the button on the bottom of the holder and fix it on your car.

Warm tips:

1. We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong adhesion properties. curved surfaces, plush fabrics, or uneven surfaces not recommended too.

2. Do not stick the bracket to the dashboard or windshield for a long time, you can reinstall the bracket before using it for the next journey.

3. After removing the phone holder, please use plastic wrap to protect the Suction cup. Please clean the dashboard before using the car mount and clean the car mount and let it be air dry.

4. If your car is exposed to high temperatures for a long period of time, we recommend that you use the air vent car holder.

5. 50% strength of bond in 20 minutes, 90% strength of bond in 24 hours and 100% strength of bond after 72 hours.

6. In cold conditions, please warm up the suction cup with hot air from a ventilator or with warm water.

Much Stronger and More Durable

Upgrading to metal will make the clip hook much stronger.

The electrophoretic surface treatment will greatly increase the wear resistance and corrosion resistance of the hook.

More Stable and Secure

The vent clip will clamp the vent blade securely, which make the phone holder more stable.

Greater Compatibility

With extended and retractable design(Max 32mm), the phone mount holder can fit for more cars’ vents.

Easier to Install and Remove

Due to upgrade to the metal material, we’re able to reduce the height of the hook without reducing the strength. So it will be easier to install and remove.

The clip’s groove design avoid blocking your A/C, so whether it is in winter or summer, you can use car’s ventilation function normally, enjoy travel. In addition, it will not damage the vent blades

HOW TO INSTALL:

STEP1: Turn the knob counterclockwise to make the hook fully extended;

STEP2: Hook the air vent blade with the hook;

STEP3: Turn the knob clockwise to shorten the hook and fix the car phone holder firmly on the air vent.

USING TIPS：

It is recommended use for the horizontal & vertical vent

Two clamp arms provide stable grip

The depth of the phone holder clamp arm is 0.6″ . Even if your mobile phone with thick case, need’t to remove the case. The built-in silicone pad on the clamp arms not only protects the phone, but also increases the grip.

Hassle-free Charging

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won’t block the aux jack. You can connect your phone with your car sound equipment freely.

All-Around Protection

There are shock-absorbing silicone arms, silicone padded back and silicone pads holding feet on the car phone mount for grabbing and protecting your cell phone.

1s Quick Release

More convenient and easier operation with new “One Key Quick Release” button,comparing with other “complex operation” car phone mount, YBPowerCable phone holder for car vent brings you new 1s releasing experience.

Adjustable Telescopic Arm

The adjustable telescopic arm make you able to adjust your phone to any angle and any place. Find the best view for your trip. That is convenient to navigate, pick up phone calls.

360°Flexible Rotation

Adjust this car phone mount with ease for its 360°joint ball design, easy to set a horizontal, vertical or more layout for navigating, phone talking, music listening, etc.

Your Phones Are Absolutely Compatible

Compatible size (Mobile phone 4″-7″ with case):

Width: 55 ~ 95 mm

Depth: 0 ~ 0.55 inch (14 mm)

Height: No Limited

All cases like Wallet Case, Battery Case.

Vehicles: Cars/ SUVs/ Trucks/ Vans/ Electrics

Fit for Most Vehicles:

Cars/ SUVs/ Trucks/ Rvs/ Vans/ Cabs/ Electrics; For Ford, VM, Mazda, Vauxhall, BMW, Audi, Toyota, Nissan, Peugeot, etc.

Phones:

iPhone 14/14 Pro/14 Pro Max/14 Plus/12/ 13 Pro/ 13 Pro Max/ 13 mini/ 12 Pro Max /12 Pro/13/ SE 2020 2023/ 11/ 11 Pro/ 11 Pro Max/ 8 Plus/ 8/ X/ XS Max/ XS/ XR/ 7 Plus/ 7

Samsung S23/ S23+/ S23 Ultra,S22/ S22+/ S22 Ultra,S20/ S20+/ S20 Ultra/S20 FE 5G,S21/ S21+/ S21 Ultra /S21 FE 5G,S10/ S10e/ S9 Plus/S9/S8plus/S8,Note 10/9/8/10 Plus/20/20 Ultra

Samsung A50/ A51 5G/A52 5G/A53 5G,A10 A12 A13,A20E A21S A20S,A22 5G/A22,A30S A31 A32 5G,A40 A41 A42 5G,A33 5G,A70 A71 5G,A72 5G,A73 5G

Samsung A03S A02 A03 M23 5G,A54 5G,A14 5G,A34 5G,A24 5G

Motorola Moto G Power 2023 2023 2021 2020,G Stylus 5G,G Stylus 2023 2021 2020,G Play,Edge 2020 2020/Edge Plus,G100

Google Pixel 7/7 Pro/6/6 Pro/5/ 4A 5G/ 4A/ 4 XL/ 4/ 3a XL/ 3a/ 3 XL/ 3

Stable and Safe Car Phone Mount: Upgraded super strong stickiness suction cup, and 2-step lock mechanism provide extremely strong suction power. It can stay securely in the car. Air Vent: With the latest improved length limit stopper locking design, the metal hook of phone holder for car will catch the air vent blade tightly yet friendly. It provides absolute fixation and the hook can’t be shortened more once fixed. In any case, it will not break the air vent or the hook.
Easy Operation, Wide Compatibility: Adjustable feet and thicker and wider clamp arms make this car holder suitable for all (4.7-7.0 inches) mobile phones or mobile phone case combinations, such as Moto Motorola G Power 2023 2022 2021 2020,G Stylus 5G,G Stylus 2023 2022 2021 2020,G Play,Edge 2020 2021 2022 2023/Edge Plus/Edge 30 Fusion/G100.G Pure/Z4,Z3,Z3 Force,Z3 Play,Edge+,G7/G7 Play/G7 Power,G7 Plus,G8,G8 Power,G8 Play,G8 Plus or other Android Smartphone.
Easy to Adjust & Multiple Viewing Angle: This cell phone holder for car has flexible 360° ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places, and can quickly switch between vertical and horizontal view. Hands free cell phone holder for cars also features a One-button release system, Two phone car holder release buttons, you can release the phone within 1 second by simply pressing any button with your hand.
All-Around Protection: Say goodbye to the easy-scratched plastic panel phone holder. YBPower phone mount uses an innovative shock-proof texture made of PU material and triangular stability. And phone holder also equipped with a thick layer of silicone. The comprehensive protection design makes leaves zero scratches on mobile phone